Spiral Resistances

Resistance Group

Spiral Resistances

In other words, hot runner nozzle resistances are used in plastic hot runner systems to ensure the fluidity of the raw material in the nozzle. Apart from this widespread use, Spiral Type Resistances can be used in the heating of pipelines that pass liquid or gas of different diameters, in laboratories and special scientific projects. Our Spiral Resistances can be produced in different power, different supply voltages (24V, 48V, 110V, 220V, 400V). This type of resistance has the possibility to be produced in different cross sections as standard. The primary and most common ones are Flat Type Spiral Resistances with a rectangular cross section measuring 2.4 mm * 4.5 mm. One of the other two models is Spiral Resistance with a diameter of 1.8 mm round section, the second is a spiral type resistance with a diameter of 4 mm round section. Maximum operating temperature of this type spiral resistors is 500 ° C. Outer sheath used in Spiral Resistances is AISI321 quality stainless steel. The energy outputs of this type of resistance are made with three Teflon insulated cables as phase, neutral and ground. In addition, our spiral type heaters are produced with standard J type thermocouples and cable lengths can be adjusted according to demand.

Gallery